1 7
Click to Get a Quote

DoorBell Mount

35° Adjustable Swivel Doorbell Bracket | Frontal Angle Doorbell Adjustment - Rotate Horizontal / Vertical

35° Adjustable Swivel Doorbell Bracket | Frontal Angle Doorbell Adjustment - Rotate Horizontal / Vertical

$40.00 USD
$50.00 USD $40.00 USD
Sale Sold out
Shipping calculated at checkout.

Adjustable Angle Doorbell Mount (0-35°) | Select Your Model

Select Your Doorbell Model for a Perfect Fit!

  • You MUST select your specific Doorbell Model and Brand from the options list.
  • Compatible with many popular video doorbells (Ring, Nest, Eufy, Wyze, Blink, Reolink, etc.).
  • Unsure of your model? Contact us with a picture before ordering.
  • Model Not Listed? We specialize in custom solutions!

Need help? Check our Ring Model Guide.

Fine-Tune Your Doorbell View with 0-35° Swivel Adjustment

Need a slight angle adjustment? This low-profile swivel mount offers 0° to 35° adjustment range with dual-axis control for horizontal (left/right) and vertical (up/down) aiming.

Perfect when mounted near your door but needing a subtle turn, or on angled siding. Sits closer to the wall for a clean aesthetic.

Precise Dual-Axis Control (0-35°)

Gain exact control over your camera's perspective. The smooth swivel joint enables fine adjustments across a 0° to 35° arc relative to the mounting surface.

Flexible Base Positioning: Mount base vertically or horizontally. Your doorbell always remains upright.

Standard Mount Dimensions

  • Base Width: 1.8 inches
  • Base Height: 3.1 inches
  • Base Hole Spacing: 2-5/8 inches (center-to-center)
  • Total Extension (@ 0° Angle): Approx. 1.5 inches from wall

Key Features & Benefits:

  • Adjustable Angle (0-35°): Dual-axis swivel for precise aiming.
  • Custom Fit Bracket: Select your doorbell model for perfect match.
  • Secure Locking: Set screws lock swivel at chosen angle.
  • Wire Pass-Through: Hole for hardwired doorbells.
  • Siding Compatible: Works on surfaces up to 1.8 inches wide.
  • Low-Profile Design: Minimal extension from wall.
  • Complete Kit: Adjustable base, custom bracket, mounting screws.
  • Durable PETG: Suitable for outdoor use.
  • Future-Proof: Often use universal base - upgrade doorbells later with just a new bracket!

Installing Your 0-35° Swivel Mount

  1. Tools & Prep: Gather drill, PH2/PH1 Philips drivers, wall anchors (if needed).
    If wiring, turn OFF power at circuit breaker first!
  2. Mount Base: Route wires through base, position, attach with #6 screws (PH2).
    Drill pilot holes if needed. Don't overtighten.
  3. Attach Bracket: Route wires through bracket, align, attach with four #4 screws (PH1).
    Use correct PH1 bit. Start gently. Avoid overtightening.
  4. Set Initial Angle: Adjust swivel within 0-35°. Lightly tighten set screws.
  5. Wire Doorbell: Connect wires per instructions. Tuck excess wire.
  6. Attach Doorbell: Align doorbell with bracket holes, secure with provided screws (PH1).
    Use provided screws, not doorbell's original screws.
  7. Finalize: Make final adjustments, fully tighten set screws gently. Turn power on and test.
    Don't overtighten set screws!

Follow safety rules & doorbell guidelines. Use correct driver sizes.

Questions? Need Help?

We're here to help with model selection or custom solutions!

Standard Color: Black. For other colors, add the separate Color Change Request listing.

Angle Note: Maximum 35° is approximate; may vary by installation and model.

3D Printed Quality: While structurally sound, minor cosmetic variations or layer lines may be present. Contact us before leaving a review if you have concerns.

Order your Adjustable Angle Mount today! Select your doorbell model for a perfect fit and ideal viewing angle!

View full details